VEGA-F Manual - User contributions [en]

VEGA-F Manual

2023-05-10T06:33:58Z

Haiyang: /* Connector specification */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || +12V
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || +12V
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:데이터바 어군탐지기.png]]
==== Adjusting the depth of water. ====
Press [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:버튼 방향키.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:버튼 방향키.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:화이트라인 일반.png]] [[File:화이트라인 검정.png]] [[File:화이트라인 흰.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:물고기 심볼.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:물고기 사이즈.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

VEGA-F Manual

2023-01-10T08:22:58Z

Haiyang:

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:데이터바 어군탐지기.png]]
==== Adjusting the depth of water. ====
Press [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:버튼 방향키.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:버튼 방향키.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:화이트라인 일반.png]] [[File:화이트라인 검정.png]] [[File:화이트라인 흰.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:물고기 심볼.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:물고기 사이즈.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

MediaWiki:Liberty-Navbar

2022-11-24T06:21:16Z

Haiyang:

MediaWiki:Liberty-Navbar

2022-11-18T04:48:47Z

Haiyang:

* icon=book | display=Manual
** display=VEGA | link=베가:VEGA Manual
** display=VEGA-F | link=VEGA-F Manual

MediaWiki:Liberty-Navbar

2022-11-18T02:17:06Z

Haiyang: Haiyang moved page MediaWiki:Liberty-navbar to MediaWiki:Liberty-Navbar without leaving a redirect

* icon=book | display=Manual
** display=베가 | link=베가:VEGA Manual
** display=베가-F | link=VEGA-F Manual

MediaWiki:Liberty-Navbar

2022-11-18T02:14:56Z

Haiyang: Created page with "* icon=book | display=Manual ** display=베가 | link=베가:VEGA Manual ** display=베가-F | link=VEGA-F Manual"

* icon=book | display=Manual
** display=베가 | link=베가:VEGA Manual
** display=베가-F | link=VEGA-F Manual

VEGA-F Manual

2022-11-18T01:56:57Z

Haiyang: /* Fish symbol */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:데이터바 어군탐지기.png]]
==== Adjusting the depth of water. ====
Press [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:버튼 방향키.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:버튼 방향키.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:화이트라인 일반.png]] [[File:화이트라인 검정.png]] [[File:화이트라인 흰.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:물고기 심볼.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:물고기 사이즈.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:물고기 사이즈.png

2022-11-18T01:56:50Z

Haiyang:

File:물고기 심볼.png

2022-11-18T01:56:27Z

Haiyang:

VEGA-F Manual

2022-11-18T01:54:55Z

Haiyang: /* White line */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:데이터바 어군탐지기.png]]
==== Adjusting the depth of water. ====
Press [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:버튼 방향키.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:버튼 방향키.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:화이트라인 일반.png]] [[File:화이트라인 검정.png]] [[File:화이트라인 흰.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:화이트라인 흰.png

2022-11-18T01:54:48Z

Haiyang:

File:화이트라인 일반.png

2022-11-18T01:54:35Z

Haiyang:

File:화이트라인 검정.png

2022-11-18T01:54:13Z

Haiyang:

VEGA-F Manual

2022-11-18T01:52:41Z

Haiyang: /* Data bar */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:데이터바 어군탐지기.png]]
==== Adjusting the depth of water. ====
Press [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:버튼 방향키.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:버튼 방향키.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:버튼 방향키.png

2022-11-18T01:52:14Z

Haiyang:

File:데이터바 어군탐지기.png

2022-11-18T01:50:45Z

Haiyang:

File:버튼 모드.png

2022-11-18T01:49:01Z

Haiyang: Haiyang uploaded a new version of File:버튼 모드.png

VEGA-F Manual

2022-11-18T01:47:48Z

Haiyang: /* Modes */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:버튼 모드.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{{주의|The above feature is only available in normal mode.}}
{{알림|You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.}}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:버튼 모드.png

2022-11-18T01:47:34Z

Haiyang:

VEGA-F Manual

2022-11-18T01:34:02Z

Haiyang: /* Pages */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:버튼 화면선택.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{{주의|You can not use pages include 340kHz without 3 Frequency transducer.}}

==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:버튼 화면선택.png

2022-11-18T01:33:19Z

Haiyang:

VEGA-F Manual

2022-11-18T01:31:26Z

Haiyang: /* System Controls */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:시스템 설정.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:시스템 와이파이.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:시스템 블루투스.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:시스템 HY-NET.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:시스템 HY-NET.png

2022-11-18T01:30:17Z

Haiyang: Haiyang moved page File:System hy-net.png to File:시스템 HY-NET.png without leaving a redirect

File:시스템 HY-NET.png

2022-11-18T01:29:54Z

Haiyang:

File:시스템 블루투스.png

2022-11-18T01:29:24Z

Haiyang: Haiyang moved page File:System bluetooth.png to File:시스템 블루투스.png without leaving a redirect

File:시스템 블루투스.png

2022-11-18T01:29:09Z

Haiyang:

File:시스템 와이파이.png

2022-11-18T01:28:46Z

Haiyang: Haiyang moved page File:System wifi.png to File:시스템 와이파이.png without leaving a redirect

File:시스템 와이파이.png

2022-11-18T01:28:27Z

Haiyang:

File:시스템 설정.png

2022-11-18T01:24:03Z

Haiyang: Haiyang moved page File:System control vega-f.png to File:시스템 설정.png

File:시스템 설정.png

2022-11-18T01:21:24Z

Haiyang:

VEGA-F Manual

2022-11-17T07:04:46Z

Haiyang: /* System Controls */

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:System control vega-f.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:System wifi.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:System bluetooth.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:System hy-net.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

VEGA-F Manual

2022-11-17T07:04:21Z

Haiyang:

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:System control vega-f.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:시스템 터치 잠금.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:System wifi.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:System bluetooth.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:System hy-net.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:시스템 터치 잠금.png

2022-11-17T07:03:05Z

Haiyang: Haiyang moved page File:System touch lock.png to File:시스템 터치 잠금.png without leaving a redirect

File:시스템 터치 잠금.png

2022-11-17T07:02:41Z

Haiyang:

VEGA-F Manual

2022-11-17T06:38:01Z

Haiyang:

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:System control vega-f.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:시스템 밝기.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:시스템 야간 모드.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:System touch lock.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:System wifi.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:System bluetooth.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:System hy-net.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:시스템 야간 모드.png

2022-11-17T06:37:52Z

Haiyang: Haiyang moved page File:System night mode.png to File:시스템 야간 모드.png without leaving a redirect

File:시스템 야간 모드.png

2022-11-17T06:37:30Z

Haiyang:

File:시스템 밝기.png

2022-11-17T05:59:44Z

Haiyang: Haiyang moved page File:System brightness.png to File:시스템 밝기.png without leaving a redirect

File:시스템 밝기.png

2022-11-17T05:59:28Z

Haiyang:

VEGA-F Manual

2022-11-17T05:55:46Z

Haiyang:

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:System control vega-f.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:시스템 재시작.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:System brightness.png|center]] || It can be adjusted by pressing [[File:버튼 좌.png]] [[File:버튼 우.png]] or [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:System night mode.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:System touch lock.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:System wifi.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:System bluetooth.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:System hy-net.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:버튼 메뉴.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:버튼 메뉴.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:버튼 메뉴.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:버튼 메뉴.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:버튼 좌.png]] [[File:버튼 우.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:버튼 메뉴.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:버튼 메뉴.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:버튼 메뉴.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:버튼 좌.png]] [[File:버튼 우.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:버튼 메뉴.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:버튼 메뉴.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:버튼 메뉴.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:버튼 메뉴.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:버튼 우.png

2022-11-17T05:55:37Z

Haiyang: Haiyang moved page File:Button vega right.png to File:버튼 우.png without leaving a redirect

File:버튼 우.png

2022-11-17T05:55:17Z

Haiyang:

File:버튼 좌.png

2022-11-17T05:54:53Z

Haiyang: Haiyang moved page File:Button vega left.png to File:버튼 좌.png without leaving a redirect

File:버튼 좌.png

2022-11-17T05:54:35Z

Haiyang:

File:시스템 재시작.png

2022-11-17T05:53:55Z

Haiyang: Haiyang moved page File:System restart.png to File:시스템 재시작.png without leaving a redirect

File:시스템 재시작.png

2022-11-17T05:53:34Z

Haiyang:

File:버튼 메뉴.png

2022-11-17T05:52:30Z

Haiyang: Haiyang moved page File:Button vega menu.png to File:버튼 메뉴.png without leaving a redirect

File:버튼 메뉴.png

2022-11-17T05:52:13Z

Haiyang:

VEGA-F Manual

2022-11-17T05:46:16Z

Haiyang:

== Basics ==
=== Before starting ===
Before using, use the product safely after reading the user manual and safety precautions.
* The user manual describes based on the default setting values.
* The contents of the user manual may differ from the actual contents depending on the software version or model.
* Some services require an internet connection.
* If the user arbitrarily modifies the operating system or software, the product may not work properly. Also, warranty service is not covered for any problems caused by it.
* Data charges may apply when using features that use the Internet through mobile hotspots.

'''Description of the symbol'''<br>
{|
|-
| style="width: 65px" | [[File:아이콘 경고.png|center]] || '''Warning''' : This sign warns that a risk of death or serious injury may result if caution is not taken.
|-
| [[File:아이콘 금지.png|center]] || '''Ban''' : This sign infoms you of action that should not be taken when using the product.
|-
| [[File:아이콘 주의.png|center]] || '''Caution''' : This sign inform you of the precautions to be taken for safe and correct use of the product.
|-
| [[File:아이콘 알림.png|center]] || '''Note''' : This sign informs you of good information to know when using the product.
|}

=== Precautions for the use environment ===
The temperature of the product may become excessively high in the following situations. High temperatures may cause product performance degradation, malfunction, or compromise safety.
* Do not store the product in extremely low or high temperatures.
* Do not expose the product to direct sunlight for a long time.
* Do not keep the product in a poorly ventilated room for a long time in the middle of the hot summer.
* Do not keep the product near appliances that may overheat, such as stoves and heating appliances.
{{알림|In case of unavoidable exposure to direct sunlight, it is very helpful to cover it with a dry towel.}}

=== Safety precautions ===
This is to protect the safety of users and others and prevent property damage in advance. Please read the following carefully before use and be sure to follow it.

[[file:아이콘 경고.png]] <big>'''Warning'''</big><br>
Failure to comply may result in death or serious injury.

'''Drive according to the actual laws.'''<br>
Drive according to the marine indications and actual regulations when guiding a route using a GPS plotter.

'''The navigator should not keep an eye on the screen during the voyage.'''<br>
It may cause a marine accident due to negligence in the front.

'''Do not mount the main in a place that interferes with vision or navigation.'''<br>
Mounting it in a place that interferes with vision or safety may cause accidents at sea.

'''Install and wire correctly.'''<br>
Failure to install and wire correctly according to the instruction manual may cause an accident or fire.

'''Do not disassemble, repair or remodel.'''<br>
In case of failure, it may cause an accident or fire. If you disassemble, repair or remodel, you cannot receive A/S.

'''Do not use in a faulty or abnormal condition.'''<br>
If it is used in an abnormal condition such as smoke or no sound, it may cause fire. Stop using it immediately and after checking the power supply , consult with the distributer you purchased .

'''This unit is for DC 12V to 36V only.'''<br>
In case of using other volts , it may cause an accident or fire.

'''Use in a well-ventilated area.'''<br>
If there is no ventilation, heat may be concentrated inside the main body and cause a fire.

'''Do not damage the wires and cords by pulling them.'''<br>
It may cause a short circuit or disconnection, resulting in a fire or malfunction.

'''Do not drop it or subject it to strong impact.'''<br>
It may cause malfunction or fire.

[[file:아이콘 주의.png]] <big>'''Precaution'''</big><br>
Failure to comply may result in personal injury or property damage.

'''Do not use for a long time with the engine stopped.'''<br>
Sometimes the engine does not run due to battery drain.

'''Use a standard product when replacing the fuse.'''<br>
Use of non-standard fudge may cause fire or malfunction. Use a 5A fuse.

<big>'''For correct use'''</big><br>
'''Handle it correctly according to the instructions.'''<br>
Do not leave it in extreme high or low temperatures. (Storage temperature range: -10℃ ~ +50℃)

<big>'''About LCD screen'''</big>
* The screen looks different depending on the viewing angle. Use it within the range of the following angles. (Top 20º, Bottom 20º, Left 45º, Right 45º)
* The vision may deteriorate at temperatures below -10°C or above +50°C, but this is not a malfunction. It will recover within the preservation temperature range.
* When used in cold weather (below 0°C), the internal lighting divice (backlight) dims, but recovers when the temperature rises.
* Hitting the screen with a sharp object may cause damage.

=== Name and role of each part ===
==== Components ====
{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:본체.png|x110px|center]]
|-
| style="text-align: center;" | Main device
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:프로텍터.png|x110px|center]]
|-
| style="text-align:center;" | Protector
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 고정대.png|center]]
|-
| style="text-align:center;" | Mounting Bracket
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 전원 케이블.png|center]]
|-
| style="text-align:center;" | Power Cable
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 리모컨.png|center]]
|-
| style="text-align:center;" | Wireless R/C
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 퓨즈&볼트.png|center]]
|-
| style="text-align:center;" | Fuse & Bolt
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 노브.png|center]]
|-
| style="text-align:center;" | Knobs
|}

{|style="display:inline-block;"
|-
| style="width:170px;" | [[File:구성품 송수파기.png|center]]
|-
| style="text-align:center;" | Transducer</br>(600W or 1.5kW)
|}

* Components may not be compatible with other devices.
* The appearance and specifications of components are subject to change without notice.
* For separately sold product, use the genuine products provided by Haiyang Olix and distributer. The use of nongenuine products can cause performance degradation and failure, and if a problem occurs, you cannot receive warranty service.

==== Each part name and key description ====
<div style="width:min(400px,100%);aspect-ratio:128/125;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/front_part_name" width="100%" />
</div>

{| class="wikitable" style="margin:0px auto;"
|-
| [[File:버튼 이동 위.png]] [[File:버튼 이동 아래.png]] || Move the depth up and down.
|-
| [[File:버튼 수심 증가.png]] [[File:버튼 수심 감소.png]] || Reduce or extend depth of water.
|-
| rowspan="2" | [[File:버튼 방향키와 로터리.png]] || Rotary: You can select a menu. You can set the ensitivity/attenuation when using the Fishfinder.
|-
| Button : This is [Input] key.
|-
| rowspan="2" | [[File:버튼 메뉴 원본.png]] [[File:버튼 모드 원본.png]] || MENU : Invoke the menu.
|-
| MODE : Select the mode, normal, bottom zoom, bottom lock, part zoom.
|-
| rowspan="2" | [[File:버튼 화면선택 원본.png]] [[File:버튼 기능 원본.png]] || PAGE : Use to select a Screen mode.
|-
| FUNC : It is used by setting the key the user wants.
|-
| rowspan="2" | [[File:버튼 마크 원본.png]] [[File:버튼 커서 원본.png]] || WPT : Add/delete marks.
|-
| CURSOR : Turn on the Time Machine.
|-
| rowspan="2" | [[File:버튼 취소 원본.png]] [[File:버튼 전원 원본.png]] || CANCEL : Use to cancel settings or exit menus.
|-
| POWER : [[VEGA-F Manual#Turn on/off|Power On/Off]] or Open the [[VEGA-F Manual#System control|System Control]] window.
|}

<div style="width:min(400px,100%);aspect-ratio:393/383;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/rear_part_name" width="100%" />
</div>

==== Connector specification ====
{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''2-TD'''</big>
|-
| colspan="2" | [[File:단자 2주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SPD_PULSE
|- style="text-align:center;"
| 2 || SPD_VC
|- style="text-align:center;"
| 3 || TD1
|- style="text-align:center;"
| 4 || TD_GND
|- style="text-align:center;"
| 5 || TD2
|- style="text-align:center;"
| 6 || TEMP_VCC
|- style="text-align:center;"
| 7 || TEMP_SIG
|- style="text-align:center;"
| 8 || SPD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''3-TD'''</big>
|-
| colspan="2" | [[File:단자 3주파.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || UDI_TD 2
|- style="text-align:center;"
| 2 || UDI_TD 1
|- style="text-align:center;"
| 3 || UFF_TD 2
|- style="text-align:center;"
| 4 || UFF_TD 1
|- style="text-align:center;"
| 5 || TEMP_VCC
|- style="text-align:center;"
| 6 || TEMP_SIG
|- style="text-align:center;"
| 7 || TD_GND
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 2000'''</big>
|-
| colspan="2" | [[File:단자 NMEA2000.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || SHIELD
|- style="text-align:center;"
| 2 || DC ±12V
|- style="text-align:center;"
| 3 || DC -
|- style="text-align:center;"
| 4 || CAN_H
|- style="text-align:center;"
| 5 || CAN_L
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''POWER'''</big>
|-
| colspan="2" | [[File:단자 전원.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || DC +(12V~36V)
|- style="text-align:center;"
| 2 || DC -
|- style="text-align:center;"
| 3 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''NMEA 0183'''</big>
|-
| colspan="2" | [[File:단자 NMEA0183.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

{| class="wikitable" style="display:inline-block;vertical-align:top;"
|-
| style="text-align:center;width:150px;" colspan="2" | <big>'''AIS'''</big>
|-
| colspan="2" | [[File:단자 AIS.png|center]]
|- style="text-align:center;"
! NO !! NAME
|- style="text-align:center;"
| 1 || GND
|- style="text-align:center;"
| 2 || TX +
|- style="text-align:center;"
| 3 || GND
|- style="text-align:center;"
| 4 || RX +
|- style="text-align:center;"
| 5 || RX -
|- style="text-align:center;"
| 6 || NC
|}

=== Memory card ===
Memory cards are used to store, restore, and back up various user data such as mark, route, track, set value and etc.<br>Vega support SD and micro SD.

{{알림|
* Depending on the type of memory card, the memory card may not be recognized.
* Saving and erasing data frequently may shorten the lifespan of the memory card.
}}

==== Inserting memory card ====

Open the cover of the memory card slot and insert the memory card according to the hole. In the case of SD or microSD, insert it until it clicks.

{{주의|
* Do not turn the memory card over or insert it in reverse.
* Some memory cards may not be fully compatible with this product. Using an incompatible memory card may damage the product, data, or memory card.
* Inserting a wet memory card may damage the product, data, or memory card.
* Close the cover of the slot to prevent liquid from entering the product.
}}

==== Removing the memory card ====
For SD and microSD, first press once until you hear a click sound. It pops out slightly for easy removal. After, take it out lightly.

{{주의|Do not separate the memory card immediately after using the product, transferring the file, or completing the transfer. Data may be damaged or lost, or the product may malfunction. The user is responsible for any damage such as data loss caused by incorrect use.
}}

=== Turn on/off ===
==== Turn on ====
Press [[File:버튼 전원.png]] lightly to turn on the product.
==== Turn off ====
# Press [[File:버튼 전원.png]].
# Press [[File:시스템 전원.png]].
# Press [[File:버튼 로터리.png]] or 'Yes' when a guide message appears.
{{알림|You can also turn it off by pressing and holding [[File:버튼 전원.png]] for more than 3 seconds.}}

=== Import previous device settings ===
You can import settings from your old device to your new device.
# Insert the memory card into the old device.
# [[File:Button vega menu.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting''' to the memory card through Save User Settings.
# Remove the memory card from your old device and insert it into your device.
# From new product go to [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization → 1. User Initialization''' to Import old device's settings from memory card.

=== Touch screen operation ===
<div style="width:min(600px,100%);aspect-ratio:600/614;min-height:0;margin:0px auto;">
<iframe key="haiyang" level="www" path="wiki/en_vega/touch" width="100%" />
</div>

=== System Controls ===
You can make basic system settings. You can enter by pressing [[File:버튼 전원.png]].
[[File:System control vega-f.png|center]]

{|
|-
| style="width:60px;vertical-align:top;" | [[File:시스템 전원.png|center]] || Power off.
|-
| style="vertical-align:top;" | [[File:System restart.png|center]] || Restart the power.
|-
| style="vertical-align:top;" | [[File:System brightness.png|center]] || It can be adjusted by pressing [[File:Button vega left.png]] [[File:Button vega right.png]] or [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] or turning [[File:버튼 로터리.png]].
|-
| style="vertical-align:top;" | [[File:System night mode.png|center]] || Switch to night mode.<br>
[[File:VEGA-F night off.png|400px|night mode off]] [[File:VEGA-F night on.png|400px|night mode on]]
|-
| style="vertical-align:top;" | [[File:System touch lock.png|center]] || Disable the touch screen. Long touch when locking by touch.
|-
| style="vertical-align:top;" | [[File:System wifi.png|center]] || Enter the Wi-Fi setting window. Connect to the Internet through Wi-Fi before using the online update.
|-
| style="vertical-align:top;" | [[File:System bluetooth.png|center]] || Enter the Bluetooth setting window, Connect to the smart phone with Bluetooth before using the Pegasus.
|-
| style="vertical-align:top;" | [[File:System hy-net.png|center]] || Connect with VEGA-F using [[VEGA-F Manual#HY-NET|HY-NET]].
|}

==== HY-NET ====
VG-12F, VG-10F connect with Bluetooth supported GPS plotter. Then they work together like one machine.

<div style="width:min(800px,100%);aspect-ratio:200/61;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/hy-net_intro" width="100%" />
</div>

'''Pairing with VEGA-F and GPS plotter'''

HY-NET uses bluetooth. Pairing the two machine when connecting for the first time.

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_pairing" width="100%" />
</div>

'''Connect using HY-NET'''

<div style="width:min(800px,100%);aspect-ratio:4/3;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/hy-net_connect" width="100%" />
</div>

=== Other setting ===
==== Unit setting ====
Set the units for distance and speed in [[File:Button vega menu.png]] '''→ 8. Advanced -> 2. Setup -> 1. Unit'''.
# DIST/Speed<br>1NM = 1.852km<br>1kt=1.852km/h
# Depth<br>1m = 3.281ft = 0.549fm = 0.609lfm = 0.660Jfm
# TEMP<br>Celsius℃ = Fahrenheit +32℉

==== Time&Date Setting ====
[[File:Button vega menu.png]] '''→ 8. Advanced → 2. Setup → 3. Time&Date'''
# Reference<br>The GPS receiver uses the international standard time, the time zone may vary by region (country).The display time can be adjusted when sailing in different time zone
# Time Format<br>You can set the time display method.
# Date Format<br>You can set the date display order to year-month-day, month-day-year, day-month-year.
# Month Format<br>You can set the date format to either letters or numbers.

==== Input-output setting ====
[[File:Button vega menu.png]] '''→ 8. Advanced → 2. Setup → 4. Input/Output'''
# Output Sentences
{| class="wikitable"
|-
! DESCRIPTIONS !! CONTENTS OF DATA FIELD !! DEFAULT
|-
| style="text-align:center;" | $GPGGA || GPS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPVTG || Ship speed and direction inforamtion || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPZDA || Time and Date || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMB || Recommended minimum voyage information || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPRMC || GNSS information || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPAPB || Heading/track controller (autopliot) sentence B || style="text-align:center;" | ON
|-
| style="text-align:center;" | $GPXTE || Cross-track error, measured || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBOD || Bearing, origin to destination || style="text-align:center;" | OFF
|-
| style="text-align:center;" | $GPBWC || Waypoint direction and distance || style="text-align:center;" | ON
|-
| style="text-align:center;" | $SYPLT || 삼영 자동 조정 장치 || style="text-align:center;" | OFF
|}
<ol start="2">
<li>Transmit<br>You can set the NMEA and AIS transmission speed.</li>
<li>Output Version<br>You can set the Output Version.</li>
</ol>

==== Transparency ====
In [[File:Button vega menu.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 6. Alpha Blending''', you can set the background transparency of the data bar and sub screen. (The lower the number, the more transparent it is.)

==== Auto back up ====
When [[File:Button vega menu.png]] '''→ 8. Advanced → 2. Setup → 6. Customizing → 9. User Convenience → 1. Auto Backup''' is turn on, WPTs and tracks are automatically backed up internally. File name is saved as mark WPT_backup.dat and track TRACK_backup.dat.

==== Equipment initialization ====
You can initialize in [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance → 7. Initialization'''.
# User Initialization : It is initialized to the settings saved by the user.
# Setup Initialization : All set values are initialized to the initial state.
# Factory initialization : All set values and user datars are initialized to the initial state.
{{알림|You can save user setting file for user initialization through [[File:Button vega menu.png]] '''→ 8. Advanced → 5. Others → 1. Save User Setting'''.}}

==== Buzzer setting ====
You can turn on and off the action sound in [[File:Button vega menu.png]] '''→ 8. Advanced → 2. Setup → 5. Buzzer'''.

==== Check the version ====
You can check the version in [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance'''.
# Program Version
# OS Version
# Map Version

==== Simulator ====
In [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance → 4. Simulator''', you can test the fishfinder with the data stored in the memory.

==== Remote control settings ====
You can settings related to the remote control in [[File:Button vega menu.png]] '''→ 8. Advanced -> 3. Maintenance -> 6. Remote Control Settings'''.

# Remote Control : You can set whether to use the remote control.
# Remote Control Pairing : You can register the remote control to use with this product. When the remote control registration window appears and then press the Cancel button on the remote control twice, Remote control is registered. When a remote control is registered, operation is possible only with the remote control.
# Remote Control Dispairing : Unregister the remote control and receive operation signal from all remote control.

==== Wired LAN setting ====
You can set IP of wired LAN in [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance → 8. Wire LAN'''.

==== Online update ====
Programs and maps can be updated to the latest version through the Internet.

{{알림|Hotspot is function that supplys wireless internet through smartphone, you can skip this process where Wi-Fi wireless internet is available.}}

==== Language and Input ====
You can set Android system languages and keyboards on [[File:Button vega menu.png]] '''→ 8. Advanced → 3. Maintenance → 10. Advanced Menu → 1. Language & Input'''.

== Fishfinder ==
=== Screen description ===
<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/scr_info" width="100%" />
</div>

==== Pages ====
Press [[File:Button vega page.png]] allows you to select 16 different screen modes.
<div style="width:min(680px,100%);aspect-ratio:167/132;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/vega-f/page_select" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || You can not use pages include 340kHz without 3 Frequency transducer.
|}
==== Modes ====
You can use the various zoom mode by pressing [[File:Button vega mode.png]] in the normal mode.
<div style="width:min(600px,100%);aspect-ratio:10/12;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/zoom_mode" width="100%" />
</div>
{|
|-
| style="width:65px;vertical-align:top;" | [[File:Icon caution.png]] || The above feature is only available in normal mode.
|-
| style="vertical-align:top;" | [[File:Icon note.png]] || You can set zoom ranges used in bottom lock, bottom zoom from [[File:Button vega menu.png]] '''→ 3. Zoom Range → 1. Zoom Range'''.
|}

=== Data bar ===
[[File:Databar fishfinder.png|center]]
==== Adjusting the depth of water. ====
Press [[File:Button vega depth up.png]] [[File:Button vega depth down.png]] to adjust the depth of the water. or
# Press [[File:Button vega left.png]] [[File:Button vega right.png]] to select the depth of water.
# Turn [[File:버튼 로터리.png]] to adjust the depth of water.

==== Auto/Manual depth range ====
You can change the depth of the water automatically or manually from [[File:Button vega menu.png]] '''→ 2. Depth Range'''.

==== Depth of water shift ====
Raise the lowest depth of water as you want and display it on the screen.
You can set in [[File:Button vega menu.png]] '''→ 4. Shift'''.
{{주의|Depth of water shift is only available for manual depth of water.}}

==== Adjusting the Sensitivitiy ====
# Press [[File:Button vega arrow.png|x60px]] to select the sensitivity of frequency. You can see that the frequency has been selected through the blue text background.
# Turn [[File:버튼 로터리.png]] to adjust the sensitivity.
{{알림|To change the sensitivity auto/manual, press [[File:버튼 로터리.png]] while the sensitivity is selected. In auto, you can adjust the sensitivit by turning [[File:버튼 로터리.png]].}}

==== Adjusting the attenuation (STC) ====
# Select attenunation (STC) of frequency by pressing [[File:Button vega arrow.png|60px]].
# Adjust the attenuation (STC) by turning [[File:버튼 로터리.png]].

=== Time machine ===
If you turn off [[File:Button vega menu.png]] '''→ 7. Scroll''', you can look back when you want to see the past screen of fishfinder.
# Press the [Cursor] key on the remote control with the fishfinder.
# When the cursor is called, press [[File:Button vega left.png]] [[File:Button vega right.png]], turn [[File:버튼 로터리.png]], or move to the past fishfinder screen by using touch and check it.

<div style="width:min(600px,100%);aspect-ratio:3/4;min-height:0;">
<iframe key="haiyang" level="www" path="wiki/en_vega-f/time_machine" width="100%" />
</div>

{{알림|If you press [[File:버튼 마크 원본.png|x40px]] on the past screen of the fishfinder, the mark is input with a red line at the past position. Depending on the situation, the error range of the generated mark is different.}}
{{주의|The length of the screen that can be checked on the time machine with depends on the depth of water.}}

=== Screen Settings ===
==== Image speed ====
[[File:Button vega menu.png]] '''→ 6. Fishfinder → 3. Display → 2. Image Speed'''. You can select the movement speed of the fishfinder screen from 1/32X to 4X.
<iframe key="haiyang" level="www" path="wiki/vega/fishfinder_image_speed" width="100%" height="330px" />

==== White line ====
Change the color of seabed surface in [[File:Button vega menu.png]] '''→ 9. Advanced → 6. Display → 3. White Line''', It clearly distinguishes the school of fish and the seabed. You can change to black and white.

[[File:White line normal.png]] [[File:White line black.png]] [[File:White line white.png]]

==== Fish symbol ====
You can set display fish symbol on school of fish when the school of fish detected on fishfinder screen in [[File:Button vega menu.png]] '''→ 9. Advanced → 6. Display → 9. Fish'''.

# Fish symbol : Turn on and off the Fish symbol.<br>[[File:Fish symbol.png]]
# Fish size : Turn on and off mark of the size of fish groups. It can be marked in cm or inch.<br>[[File:Fish symbol size.png]]
{{주의|
* Depending on the sea environment, the classification of fish groups may not be accurate.
* Depending on the sea environment, the size of fish groups may not be accurate.}}

=== Other settings ===
==== Rejection ====
Eliminate interference caused by fishfinder of other ship.
It is used at close range to fish with other ships equipped with sonar.
You can turn on and off in [[File:Button vega menu.png]] '''→ 6. Rejection → 1. Interference Rejection'''.

==== Color Rejection ====
Erazes from the screen one at a time from the lower level colors.
Use this when a lot of noise is displayed on the fishfinder screen or when you want to see only a strong reflector.
You can set it in [[File:Button vega menu.png]] '''→ 9. Advanced → 7. Color → 1. Color Rejection.'''.

==== Finder Screen Color ====
You can change the background color of the fishfinder screen in [[File:Button vega menu.png]] '''→ 9. Advanced → 7. Color → 2. Finder Screen Color'''.

==== Image Filter ====
You can turn on/off horizontal and vertical image filters in [[File:Button vega menu.png]] '''→ 9. Advanced → 7. Color → 3. Image Filter'''.

==== Pulse ====
Change the transmission pulse width of the fishinder transmitter in [[File:Button vega menu.png]] '''→ 9. Advenced → 10. Others → 1. Pulse'''.
{{알림|If the pulse width is narrowed, the school of fish discrimination is good and the water of depth discrimination is poor.}}

==== Water temperature ====
When the water temperature is not correct, You can calibrate in [[File:Button vega menu.png]] '''→ 9. Advanced -> 10. Others → 2. Watere TEMP'''.

==== Boat speed ====
When the Ship speed is not correct, You can calibrate it in [[File:Button vega menu.png]] '''→ 9. Advanced -> 10. Others -> 3. Boat Speed'''.
{{주의|Available only when the ship speed input setting is Transducer.}}

==== Draft set ====
When the ship's transducer position is different from the water's surface, You can calibrate it in [[File:Button vega menu.png]] '''→ 9. Advanced → 10. Others → 4. Draft Set'''.

==== Speed source ====
Select which ship speed information to receive in [[File:Button vega menu.png]] '''→ 9. Advanced → 10. Others → 5. Speed Source'''.

File:버튼 로터리.png

2022-11-17T05:46:07Z

Haiyang: Haiyang moved page File:Button vega rotary.png to File:버튼 로터리.png without leaving a redirect